Cut & Join

Supply options Cut & Joint

SIPTEC specialise in the manufacture of Structural Insulated Panels to suit your design, we don't produce stock kit houses. All "Siphouse" 2000 homes are either converted from clients drawings or custom designed by leading UK architects. *Building control call for working drawings and structural calculations on all building projects, we can convert your standard drawings to SIP construction and supply the required drawings and calcs*.

SIPs are priced by the square mtr. The price varies with the core thickness panel length and quantity purchased. Sips are supplied as just panels (the cheapest option) or we can cut them to fit your design requirements preparing all the window/door apertures and supplying all the sole plates connection elements, fixing etc. Siptec can also supply totally prefabricated solutions RTA, (ready to assembly) story height building elevations etc.

Sip-roofing modules are now available up to 9 mtrs in length x 1.2 mtrs x 150 mm, 180 mm & 230 mm. We can give square mtr pricing, but due to our type of construction system, we prefer to quote each plan here on an individual basis, this helps us to provide you with a more accurate, like for like pricing. The more detailed the drawing, the more efficient the estimate.

We have crews available who can erect buildings or for day rate fees we can provide on site tuition and training to self builders and contractors. We can also rent/loan you specialised tooling against a credit card if required.

We cannot scale off drawings without dimensions or provide estimates from verbal information.

The following is the protocol for getting started:

Send us your drawing, we will then send you an estimate on what SIPTEC panels will cost for your design

If you approve the estimate, on receipt of your deposit & acceptance, we will commence full SIP panel layout & working drawings as required. The cost of this is normally in addition to a Cut & Join/ supply and erect price, in the case of panel supply only these cost are to your account.
Our Structural Engineer will carry out all necessary structural calculations and then certify the design
The drawings will be sent to you for review and approval.

Upon final approval of the overall plan, SIPTEC will begin the construction and assembly of the high quality panels for your project.

NB When purchasing Sips you should be aware that:

	A PU cored SIPS Give at least 40% more Insulation value than EPS.
	Pressure Injection manufacture gives a SIP Peel strength 300% better than a laminated EPS Panel.
	Fire performance for a PUR sip is far superior to an EPS cored SIP.
	As PU Sips give superior performance for a given thickness it follows that ancillary timbers, wall & floor plates etc are smaller and therefore PU sips become more cost effective.
	SIPTEC have completed The most extensive SIP testing program ever carried out in the UK on Structural Insulated panels. We have data on Racking, Vertical UDL, Uplift, Horizontal UDL, Eccentric compressive loads, Compressive Strength, Creep, Concentrated load, thermal conductivity, tensile, sheer, peel strength, etc

NOTE: From start to finish, it typically takes 4-6 weeks to delivery.