|
 |
|
   
| SIP
FACINGS OSB - CPB - Eco - Tec
INSULATION
CORE HD PU FOAM.
11 & 15 mm OSB 3 & OSB
4
Std widths 30, 60, 90,120
cms
Thickness available 80 through to
300 mm
Length mtrs 2.4, 2.7. 3.0 &
order up to 6.5
Eco Tec 175. 200 -300 mm
Uses
Internal & external walls, roofs floors and partition walls
load & non load bearing.
|
Oriented
Strand Board OSB3 is a engineered wood panel produced from
sustainable timber resources, assembled with isocyanurate
adhesive, it has good moisture resistance, no off gassing, good
screw & nail retention and has a certified life expectancy
better than 60 years in all a superior product to the ply wood
we used to produce sips with 20 years ago.
In
our opinion the practice of applying polymer renders (acrylic
plastics) direct to OSB sip facings is ill advised, there
are many documented cases in the USA of OSB and plywood facings
rotting out after stucco was applied externally.
OSB
4 is classed as waterproof, we have found this product to be
even more water resistant than marine plywood.!
|
 |
Core
Characteristics
All Siptec sips use a HCFC free PUR core which has a zero rated
ozone depletion factor
INSULATION VALUES
U-value
calculation
by
BRE U-value Calculator
Calculation
Method: BS EN ISO 6946
λ
Value =
Aged 0.22 W/mK
|
CPB |
| Cement
Particle Board CPB is a composite board usually made from
wood chips and cement (sometimes from cellulose fiber) CPB is a
class O building board, good fire resistance, impervious to
water and frost, it is a good substrate to apply polymer render
to though sand cement renders require a mesh fixing to face. CPB
is heavy, dirty to cut and is very brittle. Siptec developed the
use of cpb to make SIPS over 15 years ago in a plant in
Greece, we have gained a lot of experience in its
application. CPB Sips from some manufacturers display very
poor adhesion to PU & EPS foam Cores. Siptec have production
methods that avoid such Problems. |
| SIPTEC
ECO -TEC Wall -PASSIVE
Developed to over come all of
the criticisms we have heard about Sips over the years.
The facings are ECO-BIO
COMPATIBLE, Electrics can safely be rebated into the 50 mm
thick facing, Cement render can be directly applied with out
fear of cracking or falling off. Plaster board can be
fixed hard onto inner facing (no Gap). Excellent fire
resistance Superb acoustic reduction unmatched by any other
sip manufacturer For Further Technical Details click here
|
 |
 |
 |
| Units |
Siptec
100 |
Siptec
125 |
Siptec
150
|
Siptec
175 |
Siptec
Duplex |
| |
U |
U |
U |
U |
U |
|
W/mēK |
0.28 |
0.21 |
0.17 |
0.14 |
0.10 |
|
|
R |
R |
R |
R |
R |
| mēK/W |
3.58 |
4.71 |
5.85 |
7.21 |
9.60 |
|
 
|
| Copyright
Siptec all rights reserved |
|
